Assembly time: approximately 5 minutes.
Difficulty: Easy.
Maximum Stem Bolt Torque: 6Nm
Max stem bolt torque: 6-8Nm
STEP 1:
With the headset installed correctly & the preferred amount of spacers already installed on the fork steerer, slide the stem onto the steerer with the stem bolts loose.
STEP 2:
Place the necessary headset spacers above the stem on the steerer so that there is 5mm between the top of the steerer tube and the top of the headset spacers or stem.
STEP 3:
Install top cap, tighten down to 2Nm. Before torquing the stem bolts, put downward pressure on the bars with a gentle rocking motion. Re-tighten the top cap to 2-4Nm. Once you have successfully preloaded the headset, align the stem to the wheel and torque the stem bolts to 9Nm.
STEP 1:
With Stem face plate removed, install bar.
STEP 2:
Install top bar clamp and bolts, tighten bolts to stem body until there is no gap between the stem body and face clamps.
STEP 3:
Thread lower bolts until bar is held in place, but can still roll easily.
STEP 4:
Torque all face plate bolts to 6Nm.
Note: It is highly recommended to check the torque spec twice before riding.
Every AH1 handlebar comes stock at 800mm width with cut lines down to 730mm
No, we do not cut any handlebars at our warehouse location.
No, we can only accept returns on products that are new, unmounted, uncut, with the original packaging. Upcycled products cannot be returned and are final sale.
Yes, every country has their own duties and taxes that need to be paid upon delivery. For European customers we do not charge VAT on our website so that will be collected at the door.
Yes, everything our athletes ride on their bikes are production parts that can be purchased on our website.
